C9350制动盘车床
C9350 Main usage and performance
1、 The machine is main used for boring and repairing the brake drum and plate
for pick-up truck、car and mini car.
2、 The machine use horizontal structure,low center of gravity and easy to clamping.
3、 Use bearing outer ring of brake drum as the locating datum,use dabber and tabber
and taper sleeve can easy to made clamping、boring and repairing the brake drum
come true.
4、 The machine are good in rigidity、quite in cutter speed、high in efficiency.In
general you only should turning one time ,the machine can reach your accuracy
requirement.
5、 The machine is variable speed control without step,easy to operate ,easy to
repair,on the safe side .
Main Specification
|
切削直径范围
Range of processing
|
制动鼓(Brake drum) 152-500mm
|
制动盘(Brake plate) 180-330mm
|
加工制动鼓深度
Max depth of processing brake drum
|
175mm
|
主轴转速
Spindle Speeed
|
70、80、115r/min
|
走刀量
Speed
|
0.05-0.5mm
|
最大切削深度
Max processing depth
|
0.5mm
|
电机功率
Machine power
|
0.75kw/1400r/min/380v
|
C9350制动盘车床主要用途和性能
1,C9350制动盘车床主要用于皮卡车,汽车和小型车的制动鼓和板的镗孔和修复。
2,C9350制动盘车床采用卧式结构,重心低,便于夹紧。
3,采用制动鼓轴承外圈作为定位基准,采用dabber和tabber及锥套,便于夹紧,镗孔和修复制动鼓。
4,机器刚性好,切割速度快,效率高。一般只需转动一次,机器即可达到精度要求。
5,C9350制动盘车床采用无级变速控制,操作简便,维修方便,安全可靠。
C9350制动盘车床是刹车盘专用车床适用于车床加工刹车盘,刹车盘车床加工